- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 海绵泡沫材料检测仪器
- 受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动角测定仪
-
落球回弹试验仪,介电击穿强度测定仪:塑料表观密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:普通磨料堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:白土堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动时间测定仪
-
落球回弹试验仪,介电击穿强度测定仪:压实密度粉末电阻率仪
-
落球回弹试验仪,介电击穿强度测定仪:陶粒砂体积密度测定仪
-
氧化铝松装密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:表面活性剂表观密度仪
-
落球回弹试验仪,介电击穿强度测定仪:自由流动堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高线电压小直流电耐压仪(耐脉冲耐压仪)-(算机抑制)
High voltage low current tester (arc resistance tester) - (computer control)
商产品名稱:耐电弧试验机
Product name: electric arc resistance tester
产品设备应用:NDH-A
Product model: NDH - A
满意标准:GB/T 1411-2002《气体绝缘性食材耐高低平电流量焊弧充放电的耐压试验》(符合IEC 61621-1997)及ASTM D495等标准单位的条件结构设计生产制造的,并适合IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
大部分适合面积及功用:
本试验报告机是可以依照软件于无刷电机、电子产品和家庭装电子产品等相关行业的电工维修用pp朔胶、硅胶粘合剂胶和耐压带带漆等耐压带带材质的耐脉冲耐热性评估,主在粉状耐压带带材质如:pp朔胶、溥膜、硅胶粘合剂、黑云母、陶瓷图片、窗玻璃、耐压带带油、耐压带带漆、瓦楞纸等物料的耐脉冲耐热性公测;
本经过多次试验设计性发现机由算出机操控行驶,能能呈现某些试验设计性工作状态及试验设计性时,试验设计性结束之后并留存某些试验设计性资料,并可网页打印.细则检测意见书。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 滤油机为下上合二为一架构,上方为操控设计,上方为可靠性环境试验箱。
2 本货品采取*新智慧控制技巧,根据的选择程序流程(IEC或ASTM)可定时实施耐压试验,并在笔记本我的电脑展示做实验的时候过程中 和没想到。
3 **性能参数更好,抗干忧专业能力强,測試高精性强。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电弧放电通断时期误差值:少于 ±10ms
2 调压器容积:2kVA
3 额定值冲击试验输出功率:12.5kV
4 可靠性试验电阻控制精度:±3%
5 工作电流调控可靠性强,精密度:±10% 电压在测量精度等级:1.5%
6 金属电极对制样压力差:(0.5±0.05)N
7 探针素材:钨棒
8 参比电极间隔:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 使用的场景温度因素:(23±2)℃
10 用条件气温:(50±5)%
11 电原:220V±5% 50Hz
12 测试 方式方法: 行业标准/美标/10 mA 维持/20 mA 连续不断/30 mA累计/40 mA联续
13 检测环节详细:
| 子程序段 | 电弧放电电流大小 mA | 电弧放电通断时间段s | 各系统程序段坚持时期s | 实验室检测总时期s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 连继通 | 60 | 240 | |
| 5 | 20 | 维持通 | 60 | 300 | |
| 6 | 30 | 反复通 | 60 | 360 | |
| 7 | 40 | 连续式通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 顺序号 | 公司名称 | 数据 | 微信备注名 |
| 01 | 耐电弧放电考试仪 | 单台 | |
| 02 | 电级模式 | 做一套 | |
| 03 | 电级网架支座 | 一整套 | |
| 04 | 电源适配器缆线 | 两套 | |
| 05 | 等电位连接放** | 一只 | |
| 06 | 直流电毫安表 | 一种 | |
| 07 | 笔记本电脑测控应用 | 一台 | |
| 08 | 试板架 | 每支 | |
| 09 | 电极片范围原则块 | 2块 | |
| 10 | 坡度规范标准块 | 2块 | |
| 11 | 陶瓷厂家片 | 2片 | |
| 12 | 喷墨彩印机 | 1台 | 牌子 |
| 13 | 统计机 | 1台 | 加盟品牌 |
| 14 | 用到表示书 | 1份 | |
| 15 | 合适证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 产品的型號:
NDH-A 耐弧光试验装置仪-微机有效控制
NDH-B 耐电弧焊接试验台仪-触感屏操纵
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!