落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-14 18:47
浏览次数:2193
摘要:
ASTMD495耐高压低电流电弧放电试验机

高电压值小电压耐压仪(耐电弧焊接耐压仪)-(来工控机调整)

High voltage low current tester (arc resistance tester) - (computer control)

货英文名称称:耐电弧试验机

Product name: electric arc resistance tester

產品尺寸:NDH-A

Product model: NDH - A

考虑规格:GB/T 1411-2002《液体绝缘电阻原材料耐高压得过低工作电流电孤电流的实验》(就是指IEC  61621-1997)及ASTM D495等标淮的耍求开发制造技术的,并按照IEC 149、UL 746A等试验台方式

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

注意符合范畴及功能性:

本检测机是都按照应该用来电机马达、电嚣落球回弹试验仪,介电击穿强度测定仪和家庭装电嚣落球回弹试验仪,介电击穿强度测定仪等相关行业的焊工用金属、树酯胶胶和耐压漆等耐压建筑素材的耐电弧放电焊接稳定性评判,主用来粉状耐压建筑素材如:金属、塑料薄膜、树酯胶、黑云母、陶瓷图片、夹层玻璃、耐压油、耐压漆、厚纸板等物质的耐电弧放电焊接稳定性测试方法;

本耐压研究机由算起机保持进行,还可以展现现阶段状况研究情况及研究期限,研究终结后并保留现阶段状况研究参数,并可打印图片.细则实验所报告模板。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该机为高低内置式结构的,下端为运作网络协议,顶部为实验室检测箱。

2 本商品使用*新智力调节方法,利用使用系统程序(IEC或ASTM)可重新去冲击试验,并在新电脑体现经过多次实验发现的过程 和最后。

3 **机械性能优异,抗干预能力素质强,自测gps精较高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电孤通断时期粗差:不低于 ±10ms

2 调压器功率:2kVA

3 额定负载检验直流电压:12.5kV

4 耐压输出功率精准度:±3%

5 电流值操纵精度等级:±10%  工作电流检测高精准度:1.5%

6 金属电极对坯料压差:(0.5±0.05)N

7 工业食材:钨棒

8 探针长度:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 选择情况溫度:(23±2)℃

10 食用室内环境室内温度:(50±5)%

11 电:220V±5%  50Hz  10A

12 试验台    方案:   执行标准/美标/10 mA 多次/20 mA 连继/30 mA连续不断/40 mA联续

13 测试应用程序正确:

方式段

电弧放电工作电流

mA

电弧放电通断时s

各程序代码段保持期限s

实验室检测总事件s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

陆续通

60

240

5

20

间隔通

60

300

6

30

陆续通

60

360

7

40

累计通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

序列号

品牌

总数

自己的名字

01

耐脉冲测量仪

1台

 

02

金属电极系統

有一套

 

03

参比电极支架

套

 

04

24v电源电力电缆

一个

 

05

的接地放**

即使

 

06

交流电毫安表

台

 

07

PC测控系统

整套

 

08

试板架

一批

 

09

参比电极距离感规定块

2块

 

10

方向规定块

2块

 

11

瓷质片

2片

 

12

喷墨印刷机

1台

品牌形象

13

运算机

1台

企业

14

动用这规格书

1份

 

15

完成证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 设备主要参数:

NDH-A    耐电孤试验装置仪-微机保持

NDH-B    耐电弧焊接耐压仪-触碰屏抑制

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪